Welcome to the topic What is the best at-home carpet cleaning solution?
Spills are inevitable, whether it be a cup of tea or a smear of paint. Somehow your carpets always end up with stubborn stains which ruin their beauty. Frequently getting your carpets and rugs cleaned by a carpet cleaning service could cost a fortune, and so at times, the best possible way to fight such stains has to be an at-home do-it-yourself solution.
Types of carpets and stains.
The first step in taking down a nasty stain is to figure out whether you have a carpet made from faux or real fibers. Your carpet cleaning solution can be customized based on the nature of the stain as well as the type of your carpet.
The stains could vary between food and drinks, ink and markers, oil and grease, or dirt and mud. It would be best if you concocted the proper cleaning solution according to your carpet and your stain.
Types of Carpet cleaning solutions and solvents.
The different types of solutions vary depending on the stain. Some commonly used homemade carpet cleaning solutions are vinegar solutions, detergent solutions, baking soda-based solutions, or ammonia-based solutions.
Before putting on any recommended cleaning solution, it is best to do a patch test on the stain, but the primary thing right after discovering a stain is to act fast and rinse it with warm water since the longer you wait, the more stubborn it gets.
Secondly, you must check up on the carpet manufacturers and their instructions regarding cleaning the carpet. Researching your carpet before trying a concoction could make you more aware of what works best.
- Vinegar Based cleaning solutions.
White vinegar has a renowned reputation in the world of all things carpet cleaning. White vinegar can help remove stains and is easily accessible for almost any household, and that is the reason why vinegar remains the most commonly used carpet cleaning solution.
In case of lighter stains, you could mix two tablespoons of salt with half a cup of vinegar and apply it directly to the spot. And once this carpet cleaning solution dries on top of your smear, just vacuum it, and voila! You have yourself a clean rug.
On the other hand, if you have a much darker smear on your carpet, adding borax or laundry detergent to the salt and vinegar concoction helps make your solution stronger and it will get rid of the stain.
- Dish detergent carpet cleaner.
Dish detergents are generally curated to fight grease, and so any DIY mixture which contains dish detergent helps a lot in getting rid of greasy or oily blotches.
The way to go about the dish detergent carpet cleaning mixture is by adding a tablespoon of dishwashing liquid and mixing it with 500ml of cold water. After you’ve concocted this cleaning mixture, just dip a washcloth or a towel in this liquid and then blot on your smear until it magically disappears.
- Baking soda-based carpet cleaners.
Baking soda is one of the most hands-on pantry items that can be used as a very successful carpet cleaning solution. It is known to work well and is most efficient in removing wet spots on your rugs and carpets. It not only soaks up the vile moisture, but it also acts as a deodorant and counters any foul odors, neutralizing them.
First, you have to blot the affected spot with a dirty towel; secondly, you pour the baking soda directly over the stain, making sure to cover it completely. Afterward, leave it to rest for a good hour or two until it totally absorbs all moisture. And then lastly, you can vacuum the baking soda up, and it leaves you with a stainless carpet.
- Ammonia-based solution.
Ammonia is an intense stain remover and can be used as a carpet cleaning solution, but it also gives off an awfully potent stench. If you’re using ammonia to get rid of carpet spots, be sure to open some windows and make sure that the area you’re working in has good cross ventilation.
Ammonia is remarkably effective when it comes to defusing carpet odors. When mixed with the wrong chemical, such as bleach, it can cause extremely dangerous and deadly fumes, so it must be dealt with utmost caution.
It is a very easy-to-make and at-home ammonia-based carpet cleaning solution. All you need is a cup of water mixed with around 2.25 liters of water. Once you have your cleaning mixture, apply it directly on the stain and leave it to air out for about 15 mins, and then gently blot with paper towels. This should be adequate enough to counter any stubborn spots.
- Hydrogen Peroxide based carpet cleaning solution.
Hydrogen peroxide is a readily available chemical bleach, which is frequently commercially used in the carpet cleaning industry. It specializes in removing older and tougher stains that are almost impossible to deal with.
To make a hydrogen peroxide-based carpet cleaning solution is relatively easy. All that you will need is a teaspoon of 3% hydrogen peroxide solution mixed with a few pinches of cream of tartar and half a teaspoon of non-gel toothpaste. Once you make a paste out of all these ingredients, you just have to apply the concoction on a washcloth and dab it onto the stain until it removes itself.
Lastly, thoroughly rinse out any remains to have your carpet completely spotless.
Choose DIYS; save some bucks!
At home, carpet cleaning solutions really are the most effective cheap way of getting rid of the worst possible stains. All you really need are a few pantry staples and a trick up your sleeve to avoid expensive carpet cleaning services that cost a fortune.
Once you’ve successfully gotten rid of the oldest stains in your rug or carpets with these successful home-based carpet cleaning solutions, surely your favorite carpets will be as good as new.
Have any questions regarding the topic What is the best at-home carpet cleaning solution? Feel Free to comment below.
Also Read: HOW TO START A CARPET CLEANING BUSINESS