How to Clean Heavily Soiled Carpet? Detailed Guide

Sep 12, 2021
How to clean heavily soiled carpet

Welcome to the topic “How to clean heavily soiled carpet.”

You can conduct an in-depth cleaning technique on your carpets if the damage isn’t recent.

The best part is that you can remove nearly any sort of filth or debris from your carpet with the correct materials. But first, we’ll need to figure out what kind of soiling you have.

This explanation is straightforward: what works on some stains and issues may not work on others.

Your carpet may seem dirty again in a few days if you don’t use the proper sort of cleaner.

Dirt, urine, or grease are the three most common sources of soiling in household carpets.

On the first two, household cleansers work fine, but grease stains generally require a specialized cleaning solution.

ALSO READ: Traditional Carpet Cleaning and Green Carpet Cleaning

Let us discuss some tips for How to clean heavily soiled carpet

How to Clean Heavily Soiled Carpet?

Cleaning Flooded Carpets

Flooded Carpet

Heavy rains produce floods, which may result in a lot of damage and losses.

Getting your carpet wet and filthy is one example of such devastation.

Following such disasters, the question remains: what is the best approach to clean a highly stained carpet?

Remove the carpet pad beneath your carpet, which you will have to dispose of and replace due to the severe damage and contamination.

Because they become glued to the floor, these carpets are difficult to clean.

As a result, the first step is to dry your carpet with an industrial extractor, following which you can simply remove it from the ground.

If flooded water remains for less than 24 hours, floor under your carpet will most likely build fungus, mold, germs.

It is important to note that floodwater is contaminated.

As a result, simply drying your carpet will not be enough to restore it because it will already be entirely polluted.

It will need to be disinfected.

Treat your carpet with an antibacterial solution to disinfect it.

Now clean your carpet regularly to bring it back to life.

After cleaning and drying the floor, lay down a new pad and then your carpet to restore your floor’s original tidy appearance.

If the floodwater is not contained quickly enough and continues for more than 24 hours, it will be regarded as black water.

This denotes very hazardous sewage water; in this scenario, such a carpet is difficult to reclaim and is recommended to be changed.

ALSO READ: Why Does My Carpet Smell Worse After Cleaning?

Cleaning Dirt And Grime

1. Rigorous Vacuuming:

Vaccum Cleaning

Before you do anything else, vacuum the carpet that needs to be cleaned.

A thorough vacuuming using an upright vacuum cleaner is what we’re talking about.

Take considerable time on this and ensure the carpet is free of any loose dry dirt.

If you skip this stage, your chemical and extraction techniques will have a far more difficult time eliminating the dirt and grime from the fibers of your carpet.

ALSO READ: How to Clean your Carpet without a Vacuum?

2. Make Use of a Pre-spray:

This is the next most crucial step after vacuuming.

In a pump-up sprayer, make up a nice, powerful pre-spray with warm water.

Spray the entire carpeting evenly, being careful not to over-wet it.

You’ll want to spray an adequate amount so that it doesn’t dry out before you proceed to the next stage.

Allow for the pre-spray to begin breaking down the soil for several minutes.

This is really important.

The use of a good pre-spray can compensate for the lack of a superior machine.

ALSO READ: How To Get Blood Out Of Carpet?

3. Make Use of a Defoamer:

It would be best if you always used a defoamer to really go the extra mile.

For each fill of the recovery tank, just a little quantity of defoamer is required.

A defoamer keeps the recovery tank from foaming up and preserves the machine.

This is especially essential if you weren’t aware of how the carpet was previously cleaned; there could still be many chemicals in the fabric that you have to get rid of.

The easiest method to use a defoamer is to mix some in a jug or bucket with warm water and then suck up a bit of this mixture before starting and after each emptying of the recovery tank.

This covers the hose and the tank in defoamer, making it much easier to clean.

4. Spray Extract:

Fill your machine with your carpet cleaner solution made from warm water.

Keep in mind that if the solution is excessively intense, the carpet may soil again more quickly.

Using a spray extractor, thoroughly clean the whole carpet.

If necessary, vacuum the carpet again to ensure that it is as dry as possible.

Allow the carpet to dry completely before walking on it.

Even with a subpar spray-extractor, a highly stained carpet will be thoroughly cleaned.

ALSO READ: Hacks to Get the Hair Out of the Carpet

5. Pretreat Old Stains

When it comes to high-traffic areas, make sure the stains are pre-treated first.

Combine equal parts white distilled vinegar and water in a small bowl.

You’ll want to heavily soak the high-traffic stain with the vinegar mixture using a spray bottle.

Give 15 to 30 minutes for the mixture to settle on the carpet.

A bonus tip is using an industrial carpet cleaner specialized to eliminate high-traffic stains for pretreatment.

Be mindful of cleaning the high-traffic areas first before washing the rest of your carpet.

ALSO READ: Are Carpet Cleaning Fumes Toxic?

6. Carpet Steam Cleaning

Steam Carpet Cleaning

The final stage in cleaning high-traffic areas and the remainder of your carpet is hot water extraction, often known as steam cleaning.

If you don’t own a steam cleaning machine, worry not!

You can buy, rent, or employ a professional carpet cleaner.

Wash the carpet with an industrial carpet cleaner inside your steam cleaner’s tanks.

Begin with high-traffic locations.

To eliminate the majority of the dirt trapped, proceed in several directions in the same way you would when vacuuming.

ALSO READ: 5 Carpet Cleaning Hacks You Need For Spring Cleaning

What Can I Do If I’m Unsure Whether the Stain Is Permanent?

Yes, the damage may be permanent if you’ve done numerous passes of deep cleaning with no change in the condition of your carpet.

Most carpets aren’t this awful, but persistent filth or specific contaminants can cause irreversible harm.

Many acids, for example, may dissolve carpet fibers, and no amount of washing or scrubbing can restore them.

Consider purchasing a rug or replacing the carpeting to hide the stains.

Replacing your carpets can be costly, but if you just need to cover a small area, purchasing a small square of carpet, stitching the edges to keep them from fraying, and putting it over the stain are all cost-effective and straightforward methods to cover up the damaged areas. You can also read the best ways to clean carpet stains.

Have any questions regarding the topic How to clean heavily soiled carpet? Feel Free to comment below.

Green Choice Carpet Cleaning is one of the best rug cleaning Westchester service providers. We ensure to provide the most hassle-free cleaning service, at affordable pricing, using safe green cleaners. To get our service contact us.

Leave a Reply

Click to Call!