Welcome to the topic “7 DIY Carpet Cleaning Hacks That You Need To Know.”
Cleaning carpets is a tedious task that consumes a significant amount of time. If you’ve always had a carpet in your home, you presumably devote a significant amount of time to its upkeep each month. However, none of this should deter you from purchasing a carpet. There are a plethora of simple cleaning hacks that can restore your carpet’s appearance with common home supplies.
7 DIY Carpet Cleaning Hacks That You Need To Know
- For Greasy Stains, Use Baking Soda
Baking soda is quite useful and it can completely remove grime and grease from your carpet. You should be aware that heavy and oily stains should never be allowed to sit on carpets for an extended period of time. Baking soda is the most convenient technique to remove oily smudges. Apply a big dollop of baking soda on the stain instead of rubbing it away.
Let it stay for a couple of minutes so the soda can absorb it. It essentially dries off the oil and grease and prevents them from settling.
- Using An Iron to Remove Stains
After starching the collars of the cleaned button-down shirts that will belong in your newly organized closet, don’t put that iron away. Instead, use it to eliminate the stains on your carpeting.
Yes, you read that right.
Surprisingly, an iron can actually be used to remove certain stains if used with diligence.
First, vacuum the carpets to remove any remaining particles. Then, using a towel saturated with a mix of one part vinegar to three parts water, dampen any spots or stains. Put the damp cloth over the stain and heat it with the iron. The stain should start to lift into the towel as you move the iron over it. Stop ironing after the stain has been removed completely – or as much as feasible.
- DIY Cleaner
Cleaning the carpets can be time-consuming, and you may be tempted to hire professional carpet cleaners. However, they are usually quite expensive, and you might easily put that money to better use. Using a DIY carpet cleaner, you can accomplish professional-grade carpet cleaning at home. Combine 2 tablespoons transparent liquid detergent with 4 tablespoons liquid all-purpose cleaning to make an effective carpet cleaner. In a gallon of boiling water, combine 1 tsp fabric softener and 1 scoop of bleach. Fill a spray bottle with the solution.
Patch test the homemade cleaner before using it to clean the entire carpet. Start spraying it on smaller portions of the carpet after you’ve completed the patch test. Allow for some time to pass before gently scrubbing it away with a stiff bristle brush.
If you’re seeking a carpet cleaner that’s gentler, non-toxic, and kid-friendly, combine a cup of white vinegar and two cups of warm water in a mixing bowl, 2 tablespoons salt, plus some drops of your favorite essential oil. This will not only clean and disinfect your carpet, but it will also leave it feeling clean. The DIY carpet cleaner recipes stated above are not only incredibly practical, but they also don’t require any additional expenditure.
- Tricks For Fluffing Carpets
Are you tired of your carpet being dented in places where your furniture has put pressure on it? Place an ice cube in the dents and let it melt. After the water has completely dissolved, wipe the excess moisture with a soft towel. If you press too forcefully, the carpet will dent again. Place a wet towel upon the dented area and iron it back and forth. Stop ironing the place when the fibers feel almost dry. Allow the carpet to air dry before fluffing the area with your hands.
- Use Squeegee For Pet Hair
It can be quite challenging to get rid of pet hair. If you have a long-haired pet, you might be tempted to give up. Pet hair tends to stick to the carpet fibers, making it difficult to vacuum them away.
A squeegee is an effective tool to remove tenacious fur. This handy contraption can remove sticky things from nearly any surface. Slightly dampen the squeegee and glide it over the fibers; the hairs will follow. After that, simply collect them and dispose of them.
- Solution For Nail Polish Spill
Acetone is widely used to remove nail polish from our fingernails. Yet, if you spill polish on your carpet, that isn’t really the first thing you use to get rid of the stain because it could significantly damage your carpet. Instead, rubbing alcohol is an efficient approach to remove nail polish from a carpet. Let the polish dry on the carpet before scraping out as much as possible with a blunt knife.
Gently dab the stain with a little amount of rubbing alcohol on a cloth. Keep at it until the nail polish has dissolved; the surplus polish will be absorbed by the cloth. If you’re worried about spoiling the fabric, you could also use paper towels.
- Vacuum Shag Carpets
Shag rugs are getting increasingly trendy. They’re soft and inviting, making them perfect for your interior space. However, the long and thick threads, on the other hand, can fester germs and microorganisms, and perhaps even lead to mold growth in some extreme cases. Consequently, it’s critical to clean it completely. But, because the fibers tangle quickly, this can be troublesome.
This is why vacuuming with the hose alone is the optimum method to clean a shag carpet. Remove not only the shaft but the floorhead as well. If you have one, you can also employ the crevice tool. It may be time-consuming, but you will clean deep into the fibers without causing damage to the carpet.
Cleansing your carpet does not have to be a tedious or expensive task. Making use of hacks to find a more efficient approach to complete specific activities can be really valuable.
One of the most important points to note is to always test any solution on a small, insignificant prior to using it on the entire carpeted expanse. This will ensure that the fibers are not harmed in any way.
Have any questions regarding the topic 7 DIY Carpet Cleaning Hacks That You Need To Know? Feel Free to comment below.
Also Read: Steam Cleaning vs Dry Carpet Cleaning