When comparing the different carpet cleaning options on offer, it can sometimes be
challenging to decide which would be the best method for your home.
To help you out,
today we’re going to compare four of the most popular carpet cleaning methods.
We’ll share the pros and cons of each option to help you decide which would be the most suitable
solution for cleaning your carpets this year.
1. Dry Foam
Sometimes known as the rotary shampoo method, this carpet cleaning method works by
applying a cleaning agent to your carpet.
This helps to draw up any of the dirt or dust that’s
settled within your carpet.
The foam created with the rotating brushes on the machine
works through the carpet fibers to remove anything stuck in your carpets.
Once the machine has had enough time to remove any dirt from the carpet, a vacuum is used to remove the
foam, leaving your carpets looking as good as new.
What are the Pros of the Dry Foam Method?
If you are looking for a quick and easy carpet cleaning method, this is one of the best
options on the market.
The rotating brushes ensure that any dirt and debris is removed
from your carpets, and it helps to remove dirt that may have been sitting on your carpets
for some time.
Another great benefit of this method is that your carpets will dry quickly, as
not much water or moisture is added with dry foam.
What are the Cons of the Dry Foam Method?
While this method is great for removing dirt, it doesn’t go deeper than the carpet’s surface
to remove trapped debris.
Compared to some of the other best carpet cleaning methods,
the temperature remains reasonably low when using a dry foam, which means it’s not the
most effective option.
Finally, specialist equipment is required for this process, which could
be temperamental and cause leaks if it did malfunction.
2. Wet Carpet Cleaning
This method is often described as steam cleaning or hot water extraction, and it involves
pre-conditioning your carpet with a chemical.
This helps to turn any stains on your carpet
into liquid and break down oil-based substances.
The water is then heated to very close to
boiling point, before being pressurized so that it can be injected into your carpets.
The process requires about ten to fifteen minutes, after which time the liquid solution can then
be removed with a vacuum.
What are the Pros of Wet Cleaning?
This is one of our top recommendations for anyone looking for a carpet cleaning method to
remove very tough stains and soiling.
The pressure and high temperature work together with the chemicals to remove everything from the carpet.
This is one of the most widely used and trusted cleaning methods, so you’ll find that it’s a safe and effective option for the
next time you need to clean your home or office carpets.
What are the Cons of Wet Cleaning?
The biggest drawback of this type of cleaning method is that it has a longer drying time than
some of the other options.
While you can reduce this time with specialist equipment, this made add to the expense of this type of cleaning.
It can be quite a pricey method to use, but
it’s usually well worth it for the excellent results.
3. Dry Cleaning Using an Absorbent Compound
This type of dry cleaning involves using a cleaning agent that’s placed all over your carpets.
You’ll then use a machine with a rotating brush to work the mixture into the carpet fibers.
This method works to clean your carpets as the powder absorbs any soils within your carpet,
and these are all vacuumed away at the end of the process.
What are the Pros of Dry Cleaning Using an Absorbent Compound?
This is a speedy solution for carpet cleaning, and you don’t need any experience to have a
go at it.
In just about twenty minutes, your carpets will be back to usual, as it’s a dry
What are the Cons of Dry Cleaning Using an Absorbent Compound?
We don’t recommend this type of carpet cleaning for anyone with very thick pile carpets.
The powder can often build up if you clean using this method too often, and it still won’t
reach the deepest part of your carpet.
If anyone in your home has any allergies, you’ll also
want to be careful, as dust can build up from this type of cleaning.
4. Use an Absorbent Pad
The final carpet cleaning method is suitable for light cleaning.
You’ll start by vacuuming the
carpet before applying a chemical solution to your carpet with a sprayer.
After leaving the
chemical solution to settle, an absorbent pad is added to a rotary floor machine to clean the
It helps push the chemical solution into the carpets and then picks up the dirt and
What are the Pros of Using an Absorbent Pad?
If you are looking for quick results which won’t cost you a fortune, this is a great solution.
For best results, only use this method on carpets that have light soiling.
What are the Cons of Using an Absorbent Pad?
This is not a suitable method for carpets with deep soiling, as it won’t pick up any dirt or
However, after using this method, you’ll find that dirt and chemicals are sometimes
pushed down to the bottom of your carpet, where they’ll remain until you opt to use
another carpet cleaning method in the future.
All of these carpet cleaning methods are great options when it comes to cleaning your
home, however, you’ll find that they each have their pros and cons.
By reviewing the best
type of carpet to use any of these methods on, you’ll be able to select the right solution for
the current condition of your carpets.
For more information about cleaning your carpets and
choosing the right method for your home, don’t hesitate to contact our team today.